
Monitoring SAP® interfaces centrally
How Waldaschaff Automotive closed its blind spot
At a glance
Customer
SAP® environment
Project duration
Period
Locations
Waldaschaff Automotive GmbH
Grown SAP® landscape with MES, CAQ and PLM interfaces plus programme and budget planning
Three interfaces in parallel over one year, a few weeks per interface
2026
Introduction
Waldaschaff Automotive GmbH is a specialist in automotive lightweight construction. As a full-service supplier, the company develops and produces structural and safety components made of steel and aluminium – including battery housings, crash management systems, structural parts, door components and tailgate structures – for renowned premium manufacturers.
Over the years, a growing SAP® landscape has come to connect numerous subsystems through interfaces. Together with 24-LOG, the company created central monitoring of these interfaces with the Interfacemonitor – turning after-the-fact troubleshooting into immediate error detection.

Starting point: the challenge
Waldaschaff Automotive operates a grown SAP® landscape that is connected to neighbouring systems through numerous interfaces – from MES, CAQ and PLM to programme planning and budget planning. Each of these connections has its own technology and logic: different transfer channels, data formats and error patterns.
That is exactly where the risk lies. The more interfaces work in their own way, the larger the blind spot – because without a central view, every single connection has to be monitored on its own. Errors in the data exchange often went unnoticed until they had long reached downstream processes. Once a fault was noticed, a laborious manual search across several systems followed – each with its own interface, its own logs and its own quirks.
The interfaces in detail – where a lot of data flows and errors hurt accordingly:
MES ↔ SAP® (goods receipt, production confirmation, material withdrawal): if a posting gets stuck here, stock levels and order progress in SAP® drift away from reality on the shop floor – with direct consequences for MRP and delivery reliability.
CAQ ↔ SAP® (usage decisions, QM notifications): if a confirmation is missing, quality status and blocked stock are shown incorrectly – in the worst case, unreleased goods enter the process.
PLM ↔ SAP® (material master creation, bills of material, documents): if the transfer fails, the basis for new or changed parts is missing in SAP® – and with it the basis for procurement and production.
In addition, there are further connected systems such as programme planning (creating planned independent requirements for annual planning) and budget planning (cost centre budgets).

The solution: Interfacemonitor by 24-LOG
With the 24-LOG Interfacemonitor, Waldaschaff Automotive gained central monitoring of all SAP® interfaces and IDocs – directly in SAP®, without an additional third-party system. Instead of checking each connection individually, the status information of all interfaces comes together in one screen.
The Interfacemonitor does not just monitor, it acts:
Central monitoring of all connected systems at a glance.
Immediate error detection – problems become visible as soon as they occur, not only when downstream processes are affected.
Active alerting – if processing keeps failing, the monitor automatically notifies the right contacts by e-mail after a configurable number of attempts.
Automated reposting by background job – certain error cases are reposted automatically. If a document cannot be processed at first (for example because an order is locked), a background job retries the posting later as soon as the conditions are met.
Targeted manual reprocessing where an automatic solution does not apply – without any loss of data.

Architecture and implementation: the monitor takes the lead
The three connections MES, CAQ and PLM were built in parallel over the course of one year, with only a few weeks for each individual interface. Architecturally, 24-LOG followed a clear approach: 24-LOG defined the interface, and the subsystems delivered their raw data 1:1. This raw data first lands unchanged in lean transfer tables in SAP® (staging layer); the source system or API does not need any SAP®-specific posting or error-handling logic. Writing the raw data completes the upstream call – only from the transfer tables does the Interfacemonitor take over further processing and posting.
From here on, control is inverted (inversion of control): it is not the API that drives the process, but the monitor that takes the lead as an orchestration framework:
Controlled step processing – the monitor calls the posting and business logic in clearly defined individual steps.
Central message and status handling – step messages are caught directly by the framework, evaluated and assigned to the data record in detail.
Decoupled posting and reprocessing – if a sub-step fails (e.g. due to document locks or master data conflicts), the data remains in staging. Processing restarts directly from the monitor – either automatically by background job or manually at the push of a button – without the interface having to send again.
The benefit for developers and business departments – new interfaces do not have to reinvent the wheel each time: separate resume tables, log collectors or reprocessing mechanisms are no longer needed. The connection is reduced to simply transferring the raw data; the monitor handles the entire process control, error handling and logging out of the box. No data record is lost, every transaction remains traceable at all times – and this is exactly where central monitoring comes in.
The result
With the Interfacemonitor, Waldaschaff Automotive has closed the blind spot – after-the-fact troubleshooting has become immediate error detection:
Interface errors become visible as soon as they occur – not only when stock levels, quality status or planning are already affected.
Instead of checking each connection individually, the status of all interfaces is available centrally in one place.
Thanks to active alerting, problems automatically reach the right contacts instead of going unnoticed.
Thanks to the transfer tables, no data record is lost: faulty documents are kept and reprocessed – automatically by job where possible, otherwise manually and in a targeted way.
The laborious manual troubleshooting across several systems is eliminated.
Voices that speak for our work
Nothing is more convincing than a satisfied customer. Read here what they say about our projects.
„Früher haben wir Schnittstellenfehler oft erst bemerkt, wenn sie bereits nachgelagerte Prozesse erreicht hatten – und dann begann die Suche quer durch alle Systeme. Mit dem Interfacemonitor sehen wir den Status aller Anbindungen zentral an einer Stelle und werden bei Problemen automatisch informiert. So können wir uns darauf verlassen, dass unsere Daten zwischen den Systemen ankommen.“
Solutions used
Here you can find the solutions we used.
Contact
Unlock your full SAP® potential now
Get to know us – in a first conversation, we identify where the greatest potential in your logistics lies.

Josef Lenz
Managing Director


















.png)



